special branch shredder for garden crushing performance easy to use, safe and reliable
My company's latest garden special branches crusher is suitable for the botanical garden, orchard, forest trees, highway maintenance, park, golf courses and other departments, mainly used in crushing pruning cut the various branches of the trees, after broken can be used as mulch, garden bed base, organic fertilizer, edible fungus, biomass power generation, also can be used in the production of high density board, particle board, paper industry, etc.After crushing, it can be directly sprayed into the transport vehicle, its transport volume is 1/10 of the original branch transport volume, this kind of special branch shredder for garden can smash branches anytime and anywhere, easy to move.
At present, most of the branch shredders used by China's garden departments are imported from abroad, and the price is expensive, our company's latest garden branch shredder to fill the gap of this kind of garden machinery in Our country,
our company's production of special branch shredder for garden crushing performance is good, high efficiency, easy to use, safe and reliable.The level of this product is comparable to that of the same kind of foreign products, reaching the advanced level in China.
| Type no. | 110 |
| The host power | 55-75kw |
| Hierarchical power | 11-15kw |
| Feeding size | 900X500mm |
| The average yield | 4-6000kg |
| Overall dimensions | 2800x200x2700 |
| Machine weight | 5000kg |
operation
1, when unpacking the case, first examine equipment inside have been damaged in transit, and then put the high machine and auxiliary engine electronic control device in place, again through the main auxiliary pipe road, each of the apertures must be used when the flange assembly seal paint "iron anchor 609" liquid sealant, guarantee the sealing of the pipes and pipe flanges are each units at the same time with a grounding conductor is connected, and grounding, in order to avoid dust explosions caused by spark.
2. Before trial operation of each single machine, check whether there are metal items in the machine, if there are any, remove them immediately.Whether the bolts are firm, the tightness of the belt, the reliability of the shield and so on.
3. After five minutes of empty operation, the operator should carefully observe the various instruments on the control cabinet and wait for the no-load current to be stable before feeding.After feeding, the current is not allowed to exceed the rated value of 32.6A; otherwise, the feed quantity should be reduced to ensure the normal operation of the discharging electric power can work regularly.
maintenance
1. In the production process, the temperature rise of the bearing must be checked frequently. When the temperature rise exceeds 50℃, the bearing shall be shut down for inspection to find out the reason and remove the fault.
2. During the operation of the new machine, the transmission belt is easy to stretch, and the proper tightness of the belt should be adjusted to ensure the working life of the belt.
3. Frequent inspection and timely replacement of vulnerable parts to ensure production quality and production capacity.
Our products are sold all over the world, you can rest assured.
