Drum 10t/H 650r/Min Sawdust Pulverizer For Particleboard

Drum Type Wood Slicer Machine Cutting Wood Used Making Particleboard Papermaking And Fiberboard

Introduction:

Drum type wood slicer is a kind of wood slicer, which is a special equipment for production of wood chips. It is widely used in the preparation section of particleboard plant, medium and high density fiberboard plant, straw plant, biological power plant, chip plant and other industries.

Drum chipper is a kind of slicer supplied by our company. It is widely used for processing raw materials. The materials processed by drum chipper are widely used in paper making, particleboard, fiberboard, wood flour processing, industrial material preparation, etc. the equipment is generally used in wood processing base. Drum chipper can cut logs, small diameter logs, branches and branches, sticks, boards and other materials with uniform growth and smooth cut. The quality of wood chips processed by this machine is high. The machine can also cut and process the residues and the waste materials of the felled wood, such as branches, branches, veneers, laths, round wood cores, waste veneers, etc. the machine can also cut materials for forestry, such as sugarcane, reed, bamboo and bamboo.

Advantage:

1. It has reasonable structure, high cutting quality, wide adaptability of raw materials and convenient operation and maintenance. The machine is composed of machine base, knife roller, upper and lower feeding roller, conveyor belt, hydraulic system and other parts.

2. Hydraulic system of drum type wood slicer: the oil is supplied to the oil cylinder by the hand oil pump. The cover can be started to replace the blade. During maintenance, the upper feeding roller assembly can be lifted to facilitate the adjustment of the clearance between flying knife and bottom knife and the disassembly and assembly of comb plate.

3. The stand of drum type wood slicer is welded by high cavity steel plate, which is the supporting foundation of the whole machine. Two flying knives are installed on the cutter roller, and the flying knife is fixed on the knife roller by the specially manufactured flying knife bolt through the pressure block. According to the different thickness of the raw material to be cut, the upper feeding roller assembly can float up and down within a certain range with the help of hydraulic system The grid sheet material falls through the mesh and there is a bottom row. The large sheet material will continue to be crushed in the machine.

Working pricile:

The drum type wood slicer is composed of body, knife roller, upper and lower feeding roller, conveyor belt, hydraulic system and so on. The machine body is welded with high strength steel plate, which is the supporting foundation of the whole machine. Two or three or four flying knives are installed on the knife roller, and the flying knife is fixed on the knife roller through the pressure block with specially manufactured flying knife bolts. According to the different thickness of the material to be cut, the upper feeding roller assembly can float up and down in a certain range with the help of hydraulic system. The qualified sheet material is dropped through the screen hole and discharged from the bottom. The large sheet material will be cut in the machine.

When the linkage control switch is on, when the main motor drives the cutter roll to rotate at high speed, the upper and lower feeding rollers clamp the wood to the appropriate position evenly. The flying knife on the knife roller cuts off the wood chips with the same length. Under the impact of the knife roller, the cut wood chips slide to the discharging part through the screen, and are output by the discharging system. When working, metal detection device and overload protection device can monitor the load of wood metal and main motor at any time, and protect knife roller and motor.

Techncal parameters: