Introduction of Continuous Grain Drying Tower
Continuous grain drying tower of forward and mixed flow,mainly composed of drying section,tempering section,combines the drying process of mixed flow and forward flow.
There are several drying sections and each one is set with tempering section.The drying process combinging the forward flow and mix flow is long and available for sufficient drying,and can be used for drying ofcorn,wheat,paddy and other grains
| Model |
Daily Handling Capacity (T/D) |
Energy Consumption Of Heat Source (kJ/h) |
Power Consumption (kw/h) |
Size (m) | Weight | ||
| Carbon steel (HGT) |
Galvanized (GDT) |
HGT | GDT | ||||
| HGT-50 | GDT-50 | 50 | 250×104 | 24.6 | 2×2.6×9 | 2×2.5×10 | 5T |
| HGT-100 | GDT-100 | 100 | 500×104 | 45.1 | 2×2.6×15 | 2×2.5×15 | 10T |
| HGT-150 | GDT-150 | 150 | 750×104 | 58.5 | 2.6×2.6×16 | 2.5×2.5×16 | 15T |
| HGT-200 | GDT-200 | 200 | 1000×104 | 89 | 3×3×20 | 3×3×20 | 20T |
| HGT-300 | GDT-300 | 300 | 1500×104 | 132.2 | 3×3.5×25 | 3×3.5×25 | 30T |
| HGT-500 | GDT-500 | 500 | 2500×104 | 210 | 3.5×4.2×26 | 3.5×4×26 | 45T |
| HGT-600 | GDT-600 | 600 | 3000×104 | 248 | 4×4×26 | 4×4×26 | / |
| HGT-800 | GDT-800 | 800 | 4000×104 | 367 | 4.5×5×30 | 4.5×5×30 | / |
| HGT-1000 | GDT-1000 | 1000 | 5000×104 | 475 | 6×5×30 | 6×5×30 | / |
Features of Continuous Grain Drying Tower
a. The equipment can be installed and used in the open air
b. Mechanized continues operation by electric centralized control,stable performance and easy to operate.
c. With the advantages of both forward flow and mixed flow,the equipment can be used to dry various grains.
d. High drying capacity,expecially suitable for drying of high-moisture grains
e. The quality of dried grains is good.
The integrated unit control and accurate temperature of the Continuous Grain Drying Tower implement the unit multi-point control technology in an infrared electromagnetic wave heating device, which can control the radiation flux of each unit from the out, which is very convenient to control the absorption of the heated object at various points in the lateral direction Radiation flux, according to the setting value of the control system, achieves accurate temperature control requirements, and solves the problem of temperature difference caused by environmental conditions.
Our products are sold all over the world, you can rest assured.
