Raymond Mill One Feed Can Be Processed Into Powder, Fineness Can Be Between 60-325 Mesh
Work Principle
Raymond Mill's working principle is that the grinding roller is rolled tightly on the grinding ring under the action of centrifugal force. The shovel scoops the material to the middle of the grinding roller and the grinding ring. The material is broken into powder under the action of the grinding pressure, and then Under the action of the fan, the powdered material is blown through the analyzer, and the fineness-required material passes through the analyzer. The regrind chamber can no longer meet the required requirements and continue to be ground. The material of the analyzer enters the cyclone separator and is collected and collected. The exhaust uses industrial filter cloth to separate exhaust air into powder.
Materials Requirement:
1.The materials must be non-flammable and non-explosive materials such as:
a) Minerals:limestone, calcite, barite, dolomite, potassium feldspar, marble, talcum, gypsum, kaoline, medical stone, rock phosphate,etc.
b) Metallurgy materials: manganese ore, iron ore.etc.
c) Building materials:glass, ceram, fireproof materials, heat preservation materials,etc.
2. Conditions for the application and output granularity:
a) The materials should have the hardness less than 9.3 in Moh's scale and humidity less than 6 percent.
b) The granularity of the end products can be adjusted from 60 to 325 meshes.
Technical Parameters:
| Model | 3R1510 | 3R2115 | 3R2615 | 3R2715 |
| Feed size (mm) | ≤15 | ≤15 | ≤20 | ≤20 |
| Finished particie size(mm) | 0.125-0.044 | 0.125-0.044 | 0.125-0.044 | 0.125-0.044 |
| Different material fineness shift production(t) | 0.5-8 | 1-18 | 1.5-20 | 2-28 |
| Speed of central shaft(r/min) | 280 | 180 | 160 | 160 |
| Grinding ring inner diameter (mm) | 495 | 650 | 780 | 830 |
| Grinding roller diameter(mm) | 150 | 210 | 260 | 270 |
| Grinding roller height(mm) | 100 | 150 | 150 | 150 |
| Host motor | y160m-6-7.5 | y200L-8-15 | y225s-8-18.5 | y225m-8-22 |
| Fan motor | y132s-2-5.5 | y160m-4-11 | y160L-4-15 | y160L-4-18.5 |
| Anaiyzer motor | y90L-6-1.1 | y112m-6-2.2 | y112m-6-2.2 | y112m-6-2.2 |
Main Features
1. Raymond Mill's three-dimensional structure, small footprint, complete sets, from the block material to the finished powder independently into a production system.
2. The fineness of the finished powder is even and the screening rate is 99%. This is difficult for other milling equipment.
3. The main drive of the milling machine adopts a sealed gear box and pulleys, with stable transmission and reliable operation.
4. The important parts of Raymond Mill are made of high-quality steel. Wear-resistant parts are made of high-performance wear-resistant materials. The whole machine has high wear resistance and reliable operation.
5, the electrical system adopts centralized control, the milling workshop can basically realize unmanned operation, and convenient maintenance.
Our products are sold all over the world, you can rest assured.
