Introduct:
Ball mill is suitable for grinding all kinds of ore and other materials,it is widely used in beneficiation, building materials and chemical industries. The ball mill is composed of the feeding part, the discharging part, the turning part, the transmission part (reducer, small transmission gear, motor, electronic control) and other main parts. The hollow shaft is made of cast steel, and the inner lining can be replaced. The rotary gear is processed by casting hobbing. The cylinder is equipped with a wear-resistant lining, which has good wear resistance, stable operation and reliable performance.
Ball mills are rolling bearing support instead of bearing bush sliding bearing support. Compared with sliding shaft support, it can save energy by 10-20%. Under the same power condition, the production capacity is increased by 10-20%.
Advantage:
1. Safe and reliable work and easy maintenance.
2. Good wear resistance and long service life.
3. Many applicable materials and a wide range of applications.
4. Energy saving and environmental protection.
5. Large crushing ratio and strong production capacity.
Working Principle:
The material enters the first silo of the mill spirally through the feeding device through the hollow shaft of the feeding material. There is a stepped lining or a corrugated lining in the hopper, which contains steel balls of different specifications. The centrifugal force generated by the rotation of the cylinder brings the steel balls to a certain height After falling, it has a heavy impact and grinding effect on the material. After the material is coarsely ground in the first bin, it enters the second bin through a single-layer compartment board. This bin is inlaid with a flat liner and steel balls inside to further grind the material. The powder is discharged through the discharge grate plate to complete the grinding operation.
Technical Parameters:
| Model | Speed(r/min) | Ball loat(t) | Feeding size(mm) | Discharging size(mm) | Capacity(t/h) | Power(kw) | Weight(t) |
| Φ900*1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 4 |
| Φ900*3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 5.6 |
| Φ1200*2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
| Φ1200*3000 | 36 | 3.5 | ≤25 | 0.075-0.4 | 1.6-5 | 37 | 12.8 |
| Φ1200*4500 | 32.4 | 5 | ≤25 | 0.075-0.4 | 1.6-5.8 | 55 | 13.8 |
| Φ1500*3000 | 29.7 | 7.5 | ≤25 | 0.075-0.4 | 2-5 | 75 | 15.6 |
| Φ1500*4500 | 27 | 11 | ≤25 | 0.075-0.4 | 3-6 | 110 | 21 |
| Φ1500*5700 | 28 | 12 | ≤25 | 0.075-0.4 | 3.5-6 | 130 | 24.7 |
| Φ1830*3000 | 25.4 | 11 | ≤25 | 0.075-0.4 | 4-10 | 130 | 28 |
| Φ1830*4500 | 25.4 | 15 | ≤25 | 0.075-0.4 | 1.5-12 | 155 | 32 |
| Φ1830*6400 | 24.1 | 21 | ≤25 | 0.075-0.4 | 6.5-15 | 210 | 34 |
| Φ1830*7000 | 24.1 | 23 | ≤25 | 0.075-0.4 | 7.5-17 | 245 | 36 |
| Φ2100*3000 | 23.7 | 15 | ≤25 | 0.075-0.4 | 6.5-36 | 155 | 34 |
Our products are sold all over the world, you can rest assured.
