1500kg Sawdust Packing Machine

Sawdust Packing Machine The compression chamber volume can be customized according to customer requirements

This machine adopts hydraulic transmission and control system.With high degree of automation, stable speed, high output, simple operation.Used for compressed packing of loose materials, sawdust, shavings, cottonseed shells, peanut shells, silver leaves, wood chips, ginkgo leaves, corn cob chips and other materials, one-time compression bagging is convenient for storage and reduces transportation cost.After compression, easy to take out loose, can also be used for environmental building materials, agricultural fertilizer, mushroom cultivation.Compression chamber size and block shape can be determined according to user requirements.

This product USES hydraulic motor rotation driven oil pump jobs when at work, in the extraction tank pressure oil, hydraulic oil delivery, spread to the hydraulic oil cylinder, driving the oil cylinder piston rod lateral movement compression in container of various materials, at last, by extrusion press side cylinder, good compression bag piece from the discharging mouth extrusion, finished bag piece of homework.

Feature

1.High auto-control system ,workfore saving

2.High yield,stable speed

3.Auto-weighting,can be adjusted according to your requirement

4.Auto-feeder,easy operation

Technical data

Installation commissioning

1. Pay attention to the vertical of main body and horizontal during installation.

2. After installation, check whether the bolts in each part are loose and whether the main engine barn door is fastened. If so, please do so.

3. Configure the power cord and control switch according to the power of the equipment.

4. After the inspection, empty load test will be carried out, and production can be carried out after normal test.

Matters needing attention and maintenance of baling machine:

1. Pay attention to the normal maintenance of the machine;

2. Regular maintenance and oil filling to ensure the matching of No. 46 hydraulic oil;

3. Tap the power supply according to the diagram, do not mix the three phase and two phase;

4. The hydraulic oil in the pumping station shall not be lower than the normal scale, nor exceed the scale limit;

5. The pressure gauge should be kept under 18MPa when normal;

6. Ensure safety and specially-assigned operation; strictly prohibit squeezing inflammable and explosive dangerous goods;

7. Any discrepancy between the annex and this note does not belong to the three guarantees.

Note: Correct and reasonable troubleshooting can effectively improve the service life of machines and improve the working efficiency of machines. Refer to Machine's instruction manual for troubleshooting.

Note: Do not squeeze inflammable and explosive articles