Introduction of Continuous Grain Drying Tower
Continuous mixed flow grain drying tower consists of drying sections,tempering section and cooling section ertc.Many layersof air ducts are arranged in an alternate way to form a mixed air flow blowing through the grain to remove the moisture. Suitable for drying coarse grains-corn, maize.
The first important part of continuous grain(corn,maize) drying tower is the hot-blast furnace. The following types like: coal burning furnace, fuel burning furnace, natural gas burning furnace, and bio-fuel burning furnace will be available for users. The main function of the furnace is to provide continuous grain(corn,maize) drying tower with hot air as the drying medium.
The most important part of the continuous grain(corn,maize) drying tower is the drying machine. Its internal components are mainly composed of air intakes and angular boxes.
| Model |
Daily Handling Capacity (T/D) |
Energy Consumption Of Heat Source (kJ/h) |
Power Consumption (kw/h) |
Size (m) | Weight | ||
| carbon steel (HGT) |
Galvanized (GDT) |
HGT | GDT | ||||
| HGT-50 | GDT-50 | 50 | 250×104 | 24.6 | 2×2.6×9 | 2×2.5×10 | 5T |
| HGT-100 | GDT-100 | 100 | 500×104 | 45.1 | 2×2.6×15 | 2×2.5×15 | 10T |
| HGT-150 | GDT-150 | 150 | 750×104 | 58.5 | 2.6×2.6×16 | 2.5×2.5×16 | 15T |
| HGT-200 | GDT-200 | 200 | 1000×104 | 89 | 3×3×20 | 3×3×20 | 20T |
| HGT-300 | GDT-300 | 300 | 1500×104 | 132.2 | 3×3.5×25 | 3×3.5×25 | 30T |
| HGT-500 | GDT-500 | 500 | 2500×104 | 210 | 3.5×4.2×26 | 3.5×4×26 | 45T |
| HGT-600 | GDT-600 | 600 | 3000×104 | 248 | 4×4×26 | 4×4×26 | / |
| HGT-800 | GDT-800 | 800 | 4000×104 | 367 | 4.5×5×30 | 4.5×5×30 | / |
| HGT-1000 | GDT-1000 | 1000 | 5000×104 | 475 | 6×5×30 | 6×5×30 | / |
Features of Continuous Grain Drying Tower
· Constantly, stable, easy operating, small footprint.
· Suitable to various grains.
· Heat recycling, lower cost of energy.
· Grain drying complete, evenness, dry grains can storage directly.
· Quality after drying is pretty good, no pollution
Working principle of Continuous Grain Drying Tower
In the whole process, raw grain will first fill the drying container, then the hot-blast generated by the furnace will go through the air intakes and enter the inside of the machine. Corn flows slowly from top to bottom by gravity. Meanwhile the hot air flow through the corns layer by layer. In this process, heat is transferred from hot air to grain material to raise the grain temperature to make the moisture inside the material evaporate into the air and become exhausted air, then discharged into the air through the angular boxes. if the working temperature inside the dryer exceeds 150 degrees, or the temperature of corn more than 60 degrees, the quality of corn will be greatly affected, so that select the technology of tempering process, alternating high and low temperature drying multi-level segment, the corn into the cooling section, after cooling, cooling grain to grain storage temperature, then discharged from the grain discharge section greatly to ensure the quality of maize, but also save energy, making breakage rate of corn to 3‰ or less.
Our products are sold all over the world, you can rest assured.
